Home Urban Infrastructure News Steel & Metal Building News H&K India excels at 2018 MSME Steel Conclave

    H&K India excels at 2018 MSME Steel Conclave

    310
    MSME Steel Conclave
    Joint Secretary Ministry of Steel, Smt. Ruchika Govil interacts with H&K India Chairman, Raj Kumar Markan before the official start of the 2018 MSME Steel Conclave

    H&K India which has made a stellar contribution towards the upliftment of India’s steel industry, lead the way at the recently-concluded 2018 MSME Steel Conclave.

    The one-day event was organised in Mumbai, jointly by the Government of India – Ministry of Steel and Steel Re-rollers Association of Maharashtra.

    As representatives from Micro, Small and Medium sized enterprises (MSME) from all four corners of the country converged into the island city to showcase their strengths, achievements, and contribution to the Indian economy, the German proprietary THERMEX® QST technology which, for the past 27 years, has been indigenised, marketed, manufactured and installed by H&K India in our country, found special mention at the conclave.

    Primarily, the event brought to the forefront some of the many robust initiatives taken by the Ministry of Steel to encourage participation of ‘Made-in-India’, technology-advanced and environmentally-friendly MSME steel in various government projects.

    H&K India which is credited for transforming India’s MSME steel sector with its modern and relevant technologies, imported into India through the technology-transfer route, was among the key industry participants.

     

     

    Given the Government’s objective to encourage the use of MSME steel, a large delegation flew from Delhi to Mumbai for the conference. It included:-

    • Hon’ble Minister of Steel, Shri Chaudhary Birender Singh
    • Principal Secretary Ministry of Steel, Dr. Aruna Sharma
    • Joint Secretary Ministry of Steel, Smt. Ruchika Govil
    • Technical advisors from the Steel Ministry
    • Government agencies like NHAI, Railways, Municipal Corporations and Road Development Corporations that consume steel
    • Members of the Banking community that extend finance to MSME sector
    • Premier R&D institutes
    • Representatives of the Bureau of Indian Standard.

    The VIP delegation visited and spent about 10 minutes at the H&K India’s special informative stall and learnt about high-strength, high-ductility THERMEX® rebars – ideal for India’s seismic zones. During this interactive visit, Ms. Radhika Markan, MD; Mr. Satguru Saran Markan, Deputy MD; and the entire H&K India team showcased the latest innovations in THERMEX® QST technology to members of the delegation.

    Installed as Version 1 at Steel Authority of India’s Durgapur and Bhilai Steel plants, THERMEX® has been subsequently upgraded to Version 2 and Version 3 and installed in over 260 MSME projects in the Indian sub-continent, Africa and Middle East.

    Among the many advancements showcased was the special ‘Made-in-India’ quadruple, triple and twin THERMEX® slit quenching equipment where a single rebar that has been slit into 4, 3, or 2 strands gets effectively quenched.

    Large government projects have enormous steel requirement. A rolling mill with THERMEX® slit quenching technology is capable of producing anywhere between 30,000 to 50,000 tonnes of high-strength, high-ductility rebars per month – ensuring a steady supply to Government projects.

    Enthusiastic cheers and claps from the entire Government delegation were in store for the history-creating Version 4 THERMEX®  – a technology capable of producing Grade B500DWR of International Standard ISO:6935-2 or Grade Fe500S of Indian Standard IS 1786:2008 from plain carbon steel.

    B500DWR or Fe500S are very high ductility rebars – a pre-requisite for severe seismic hazard areas. These rebars have a strict codal requirement of minimum 1.25 Stress Ratio which is normally achieved by adding expensive alloys like Vanadium – a high cost solution for manufacturers. But the THERMEX India team successfully commissioned 8mm to 40mm rebars for International Grade B500DWR, using plain carbon steel and no expensive alloys, in just 5 days.

    This THERMEX® system, designed by son-of-the-soil Indian engineers in India after years of R&D, was exported to and commissioned in Africa – a reverse technology transfer of sorts. News of this proud ‘Made-in-India’ moment was received very positively by the delegation, stall visitors and conference attendees.

    At the stall, H&K India engineers also conducted a live demonstration of a quick and easy etching test to identify good and bad rebars at government projects – much to the delight and interest of all present.

    H&K India Upliftment of Main and MSME steel sector

    • 1991: FIRST ‘Stop-Start’ Rotary Shear in India at DSP, SAIL
    • 1991: FIRST ‘Stop-Start’ Crop-cum-cobble Shear in India at DSP, SAIL
    • 1991: FIRST Thermex System at DSP, SAIL
    • 1992: FIRST Bundling-Binding Systems (2 nos.) at DSP, SAIL
    • 1992: FIRST Grip Tilters in India at Kalyani Steels, Pune
    • 1993: FIRST Trough Tilter at Kalyani Steels
    • 1994: FIRST Thermex System for 25-40mm at Bhilai Steel Plant, SAIL
    • 2000: 100 Thermex Systems Milestone Reached
    • 2012: 200 Thermex Systems Milestone Reached
    • 2014: FIRST 4-Strand Slit Thermex Pipe Commissioned
    • 2017: FIRST to achieve TS/YS ratio >1.25 in rebars from plain carbon steel

    LEAVE A REPLY

    Please enter your comment!
    Please enter your name here