Home Concrete Adhesives & Chemicals KF -B Treatment for a Longer Shelf Life

KF -B Treatment for a Longer Shelf Life

256
KF-B

KF-B admixtures make concrete completely waterproof so no membrane is needed (actually it is counter-productive to the product’s performance). Examples attached are of ponds built right into the ground without any isolation membranes or curing of the concrete. Economy on:

  • No need for geotextile membranes
  • No concrete curing
  • No need for any toppings or densifying agents to seal the concrete
  • Use lowest grade cement
  • No fibers or any other admixtures necessary with Kalmatron.
  • Concrete 100% waterproof at 50 mm slab thickness
  • Plaster 100% waterproof at 20 mm layer thickness
  • Simplest concrete mix design using just Kalmatron, sand, cement, aggregate and water

Kalmatron® KF-B is a wataproofing and repair compound. KF-B stops all seeping leaks immediately on application.

  • Simple and safe to use – just add water
  • Stops seeping leaks in basements, garages, pools, tunnels, ceilings, walls, floors, and foundations
  • Inhibits mildew and algae growth
  • 100% waterproofing from both sides
  • Sets in 15 minutes, hardens completely in 45 minutes.
  • Non-polymer based VOC free
  • Won’t lift, bubble, peel or flake
  • Adheres to concrete, brick, stone, stucco, and cement bonded particle and fiber board subfloors
  • No surface sealants are needed
  • For interior or exterior use
  • Color: gray
  • Surface can be painted, pigment can be added
  • Available in 10 lb., 20 lb., 30 lb., 50 lb. bags

Kalmatron® KF-B is a non-crystalline, inorganic waterproofing coating (U.S.A. Patent 5,728,428)

KF-B is a coating that works naturally with concrete/masonry to stop seeping leaks. KF-B is cement-based and penetrates into the concrete to the depth of the deterioration, regenerating the old concrete and becoming an integral part of the structure, rather than a separate foreign layer on top of it. There is no flaking, bubbling, or peeling, and no expansion or contraction due to temperature changes. Unlike epoxy coatings, a layer of KF-B will not allow water to pass through even if the coating is broken or chipped.

For Further Details
Neha Infra Services
5 D-10, Gr.Flr, Magan-Wadi, Varma-Villa Compd. ; Vithalbhai Road, Vile Parle (West), Mumbai, Maharashtra India , Pin- 400056
Ph: 022-26704011
Email: nehainfraservices@gmail.com

LEAVE A REPLY

Please enter your comment!
Please enter your name here